Division Name: Hunter Douglas Middle East
- Web: www.hunterdouglasarchitectural.eu/en-AE/
- Address: P.O. Box 17283 Jebel Ali, Dubai United Arab Emirates
- Phone Number: +971 4 813 1800
- Fax: +971 4 886 3301
- Contact Us: Contact Us
Thank you for your information. We will be in touch with you shortly.
There was an issue saving your request, please try again.
Please accept the Privacy Agreement.
Name, email, company, phone, location and at least one product selection are required.
Linear Closed 84C
The 84C closed ceiling system consists of box shaped panels that can be easily clipped onto a carrier system. The 84 mm wide panels feature a 24 mm wide flange that closes-off the 16 mm joint between the panels. The system module is 100 mm.
Slender (12.5mm high) box shaped panels with 16mm wide closed joints that enhance the linear appearance of the ceiling and provide a directional effect in a room.
- 84mm wide box shaped panels with 16mm wide closed joints
- Panels can be supplied in any length up to 6000 mm (i.e. less joints)
- Optimum acoustic control achieved using perforated panels with a non-woven textile membrane bonded to the inside face
- Demountable panels, which allows full access to services and equipment in the plenum
- The joint flange can be supplied with a rectangular perforation for ventilation purposes
- Panels are also available for use in exterior applications
- Cradle to Cradle Certified™ Bronze (Cradle to Cradle Certified™ is a certification mark licensed by the Cradle to Cradle Products Innovation Institute).
The 84C Closed Aluminium Ceiling Panel is suitable for all building sectors including Corporate, Transport (airports, metro, bus and train stations), Retail, Leisure, Public space, Hospitality, Healthcare, Education and Residential.
Please contact us to discuss your requirements.
Design & Inspiration
The Slender box shaped aluminium panels can be specified to create an emphasis on the direction of the panels. They can also incorporate a closed flange with a slotted perforation for improved ventilation.
Colours & Finishes
The Hunter Douglas range of Metal Ceilings, are available in a range of standard colours that are suitable for most applications. For further information on ceiling types and the special finishes and colour ranges that are available for specific projects please contact our sales office.
The 84C closed ceiling system consists of box shaped panels, that can be easily clipped onto a carrier system. The 84 mm wide panels feature a 24 mm wide flange that closes-off the 16 mm joint between the panels. The system module is 100 mm. Panels are demountable for easy access to the plenum.
More product details
More detailed information can be found in the downloads section below. Here you can find information about: Maximum spans, dimension & weights, material requirement per m2
The acoustic performance in an office space, school or public building contributes to our well being as poor acoustic comfort can affect health, communication, safety, productivity and learning. Hunter Douglas high performance acoustic ceiling products are the best solution to deliver outstanding acoustic performance, comfort and an aesthetically pleasing environment. With the Luxalon 84C closed ceiling system an absorption value (αw) 0.65 - 0.75 can be obtained, depending on the ceiling and panel configuration.
More information about acoustics
Further acoustic information can be found at the downloads section below.
Health and wellbeing
The Hunter Douglas Architectural range of ceiling products contribute to sustainable buildings through aesthetic solutions that enhance comfort and save energy. Promoting the health and well being of their occupants is arguably the most important function of building. Our shading solutions promote the use of healthy daylight without the hindrances of glare and thermal discomfort. Our acoustic ceilings are a key element in the provision of acoustic comfort.
Environmentally sound materials are the key to a sustainable building. Our strategy is to pick materials that have good environmental properties to start with. Many of our products are made of aluminum produced in our own smelters. We have optimised our processes to use up to 99% of recycled content to produce the right alloy for our products. Our wood is FSC certified and we embrace the Cradle to Cradle principle in our product development.
Reducing the energy use of the total building stock is key to the prevention of global warming. Most modern office buildings use more energy for cooling than heating. Effective management of the solar energy that passes through the transparent part of the façade is a key strategy in the prevention of overheating in both old and new buildings. Our high performance shading solutions bring substantial energy savings, while at the same time promoting health and wellbeing.
Corporate Social Responsibility
Keen on Green is an important company-wide initiative to reduce energy consumption, water usage and our overall carbon-footprint. We embrace the ISO 14001 framework to actively manage our Keen on Green objectives. Hunter Douglas and its employees actively support the communities in which we live and work, as well as those on a more global scale. Business is people. We pride ourselves on our worldwide network of experienced, intelligent, passionate and creative people who have consciously chosen Hunter Douglas as their employer.